Hose at base where it hits the floor is broken

The hose where it bends from the floor cleaner to the stick is broken. Need to know where I can take it for repair in the 23464 area. I have only had this a little over two years and have never had a vaccum break when it is so new. Not happy


Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Most Helpful Answer

Elizabeth Braithwaite, You could try contacting the manufacturer(1st link below) to see how well they will stand behind their product(voice your concerns of problem) or enquire of their recommended service center in/near your location. You could try to do a search in yellow pages or on the Net for local repair shop, 2nd link below may help. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.



Was this answer helpful?

Score 2
Add a comment

Buy a length of 1 inch/3mm uvpc pipe

Cut to fit

Insert into broken pipe

Assemble vacuum

Job done..

Much cheaper than buying a new powered head from shark

Was this answer helpful?

Score 0
Add a comment

Add your answer

Elizabeth Braithwaite will be eternally grateful.
View Statistics:

Past 24 Hours: 14

Past 7 Days: 58

Past 30 Days: 205

All Time: 1,277