Clothes dryer repair and support guides.

255 Questions View all

Auto lock is on won't start

Auto lock is on won't start Kenmore Elite HE4 Dryer

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

Light stays on tried holding button and also unplugged for several minutes...model 110.85876400 serial MS1805632

by

Add a comment

1 Answer

Chosen Solution

@burza you are not giving us a lot to work with. Try unplugging the dryer for five minutes to allow it to reset. If that does not work hold the "Drain/Spin" buttonAND the main "Start (Press & Hold)" button at the same time for 3 seconds. Some models you will have to hold the "Auto Dry Level" button for 3 seconds or longer until the "Control Locked" light goes off. If the control will not unlock, the failure is likely the console assembly which will likely need to be replaced. It will help if you can give us your complete model number.

Was this answer helpful?

Score 3
Add a comment

Add your answer

Mary will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 38