Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus.

3059 Questions View all

screen won't turn on after assembly, but once raised it powers on?

So I have an iPhone 6 that I'm replacing and the screen works fine when its not pressed into the body. But once I press the screen into the body it turns off. When I raise the right side of the screen a little bit to look back into the phone it turns on? I found 2 random screws in the phone (prob from previous repair) and removed them. But it didn't solve the issue.

Thoughts?

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

I ended up putting a new screen on and it worked fine. Must have been the flex table. Thank you.

by

Glad to help!

by

Add a comment

1 Answer

Chosen Solution

First thought that comes to mind is a bad LCD Flex Cable on the screen you've installed. Have you tried a new screen?

Was this answer helpful?

Score 1
Add a comment

Add your answer

lambert1825 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 21