Repair guides and support for your LG TV.

253 Questions View all

Lg50pt350 red standby light stays on, no picture and clicking noise

Had a lightning storm last night and TV won't come on.. red standby light stays on and I can't power on with control or panel... There is also a clicking noise when plugged into wall circuit coming from power supply plz help

Answered! View the answer I have this problem too

Is this a good question?

Score 1

Comments:

@jrog22 the red standby light stays lit, no change, no blinking?

by

this is happening to my tv except the power goes on just no picture or sound just the clicking noise. I tried unplugging and still not working. Any suggestions, thinking I need to buy a new one?

by

Add a comment

1 Answer

Chosen Solution

@jrog22 time to unplug it for a while and see if it resets. If that does not work, you will have to remove the back of the TV and take a look at the power board. Start with the No Power Troubleshooting for this model

Block Image

and check to see if you have the proper voltage on the board

Block Image

Of course, you also want to make sure that all the fuse on the board show continuity. Post some images of your boards with your question so that we can see what you see. Use this guide for that.

Was this answer helpful?

Score 2
Add a comment

Add your answer

Josh will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 11

Past 30 Days: 37

All Time: 262