Won't run a cycle

My whirlpool dishwasher will only cancel and drain. I can unplug it for 30 minutes and plug it in and it will run one cycle. When I empty and reload it won't start. I've done this for 3 days now.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Hi @brendareeves

here is a link which shows how to run a diagnostic program on a Whirlpool dishwasher. Hopefully it will work on yours. If it does and you get a result click on the 'here' link in the page to see what the problem might be. If you need more help after that get back to us here. http://www.drdishwasher.com/troubleshoot...

If this is no good what is the model number of your dishwasher?

Was this answer helpful?

Score 2

Comments:

Whirlpool Quiet Partner III Dishwasher

Model GU2500XTPB6

Serial  FS5310844

by

Hi Brenda,

Try this sequence and see if the diagnostic mode will run.

To start diagnostics, press the following keys in order in less than 6 seconds

Heated dry, Normal, Heated dry, Normal

To rapid advance the diagnostic one interval at a time, press the Start key

When you get to the end your dishwasher will be in normal mode again

by

Add a comment

Add your answer

Brenda Reeves will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 34

All Time: 115