Why the mower deck won't turn
when I engage the mower deck it will not turn the blade is this because the belt needs replace
Is this a good question?
Score
0
338067
1 Answer
Chosen Solution
Rep: 101.2k
8
172
358
BK. there can be a few things for blades on a riding mower to not turn, broken deck clutch cable, broken/worn belt, belt has slipped off pulley, seized pivot arm, belt not routed properly, if blades are electric clutch driven, could be a fuse, bad wire broken/connection, faulty clutch, faulty engage switch,faulty battery, etc.
You may want to have a good small engine tech. have a look, diagnose and estimate repair.
Check the attached links for more detail on how to check for a lot of stated possible faults.
http://www.shopyourway.com/questions/116...
Was this answer helpful?
Score
3
1 Comment
bktrouble2001 could very well be the belt. What model is it and what have you checked?
by oldturkey03