Skip to main content

Power light continous green LED flashing for +/- 5 seconds, tv "dead"

Power LED when switching ON, flashes continuously GREEN for about 5 seconds and then steady GREEN LED - and no display on the screen - blank /"dead".

Under normal conditions, the GREEN LED will flash for about 3 seconds then "flip-flop" to RED status, i.e: TV is now in "standby" mode.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Locate the DG Board (Audio) and re-solder the DG Board connector pins of both power supply connector from the main Power Supply Board.

A "dry joint" was not allowing theDG board to fully 'diagnose and reset' on Power On...

( In my case the DG board was the TNPA4311 )

Was this answer helpful?

Score 0
Add a comment

Add your answer

jotburke will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 118