The Black and Decker is a cordless household drill that can be found by the serial no. LDX 120C

4 Questions View all

Why isn't the chuck able to tighten?

When i turn the head of the drill to loosen the head nothing is moving, what do i do?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

The problem you are facing is because of the planet gear inside the chuck. the gear might be loose, or some the components may be broken and need to be replaced.

Follow our guide (haven't completed the guide yet) that provides a step by step process on how to do so.

Check out our Troubleshooting

for more help.

Was this answer helpful?

Score 0
Add a comment
Most Helpful Answer

My drill had the screw that holds the chuck to the shaft come loose, and it bound up inside so the chuck wouldn't turn. I took it out, and it worked fine after that. The chuck hasn't fallen out either, must be glued on.

Was this answer helpful?

Score 1
Add a comment

Add your answer

jeffrey zakka will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 23

Past 30 Days: 88

All Time: 505