Repair guides for cameras of the now-discontinued Minolta line.

47 Questions View all

Minolta X-570: Why can't I advance my film, the lever won't move

One day I shot a picture using my Minolta X-570. The shutter worked normally but when I tried to advance to the next shot, it was if the gears in the camera were locked.

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

Chosen Solution

Apparently this is a common problem with the X-570 and the X-370.

When this happens, it means that the shutter mechanism has not fully completed its cycle. This may be due simply to "lack of exercise" - the mechanism may have become a bit sluggish - or a problem with the electronics. Apparently, the electronic circuit that controls the shutter has a part (a capacitor) that tends to fail due to old age. People tell me it's a relatively easy repair, and repair shops familiar with Minolta bodies will fix this problem at moderate cost.

To unblock the mechanism, gently whacking the bottom of the camera against the palm of your hand might help. But it would be a good idea to start looking around for a competent repair shop. Ask veteran photographers (those who grew up using film cameras) for leads.

Was this answer helpful?

Score 2
Add a comment

Add your answer

tytypunkin will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 12

Past 30 Days: 50

All Time: 429