it just shut down, no power
it's a campbell hausfeld welder model ws28000
Is this a good question?
Score
0
290521
2 Answers
Most Helpful Answer
Rep: 91
3
Can you hear it hum ? If not you probably blew a fuse in the unit. Hopefully you checked the breaker panel to make sure you didn't trip a breaker. If you do hear a hum ,you have power . It may be you lost your ground , but if you are not familiar with high voltage I would get someone who is.
Was this answer helpful?
Score
1
Rep: 2.2k
20
9
11
It could also be that the thermal overload has tripped. With cheaper stickwelders, they over heat a lot. When this happens, let the unit cool down and the thermal overload reset.
Was this answer helpful?
Score
0
