Fix Your Stuff Community Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Questions View all

Options

Tried to repair front panel using instructions, display won't work?

My dad and I just tried to use the guide to repair the cracked screen on my iPhone 3GS. We did everything correctly (minus one screw) but now the phone turns on but doesn't display anything.

Anyone else have the same problem?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

I am assuming you mean that you tried to replace the broken glass and digitizer right? Or you replaced the LCD as well? The glass is on top, the digitizer is under the glass glued on to it and the LCD is underneath that.

Make sure your LCD is properly connected to the logic board. Carefully push it down until it snaps into place. Then try holding down the sleep button and the home button at the same time for a few seconds.

Also if you didn't turn off the iphone before doing the repair you might of damaged the logic board. Or you might have damaged the LCD as well.

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

I had to change it in my Iphone 4 and I broke the cable of the LCD screen it's very sensitive.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

lbusser will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 514