Unbranded UB-15MS10 tablet Screen Replacement HELP! :-)
I have an Unbranded Un-15MS10 Tablet with a cracked screen. I have replaced many phones and tablet screens before. I found the replacement part fo this device on Ebay...
DY10120(V2) Unbranded UB-15MS10 10.1" Tablet Touchscreen Digitizer Replacement
LIKE many tablets that I have seen... when you remove the old digitizer glass, it's cable (ribbon) goes down through an opening to the backside of the LCD... and is clipped in.
HOWEVER UNLIKE other Tablets... I can Not Find ANY info on how to get behind the LCD to disconnect the old cable, so that I can also reconnect the new digitizer.
Has anyone out there ever worked on one of these?
It looks like there are three clip / tabs (two at the bottom and one on the left) on face of the LCD... but I cant seem to get them to "pop off" and I don't want to force / break anything.
Any and all help would greatly be appreciated!
Is this a good question?