Rep: 109
2
4
When closing the freezer the door will not always close or seal tightly there continues to be a gap on one or both sides that are making it run continuously & frost up on the inside
Is this a good question?
Rep: 448.9k
11
366
1.4k
Hi Carole Jacoby
I'm assuming that you have a Whirlpool freezer.
Here is a link that shows how to replace the door gasket (seal). It is the same for a freezer as for a refrigerator
https://www.youtube.com/watch?v=rR7G11n6...
Here is a link for the part.
Not sure which is the correct one for your freezer, as you didn't state the model number. Suggest that you use the search box and put in the exact model number of your freezer. If you get no results from the search, contact the 1-800 at the top of the page and ask.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 32
All Time: 14,092
1 Comment
Same thing is happening to me. Do I need to get a new freezer or can the seal be replaced. Please advise before I spend money I don't have for a new freezer!
by carole jacoby