Skip to main content

Fix Your Stuff

Right to Repair

Store

GE Digital Messaging System identified by the model number 29875GE1

9 Questions View all

Why doesn't the remote control work

Device Won't Respond to Remote Control Commands

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Make sure you are using a touch tone (or push button) phone. When you are setting up the remote commands, make sure you are using the correct security code. Also make sure that the unit didn't hang up while you were attempting to enter your remote commands.

Was this answer helpful?

Score 0
Add a comment

Make sure your components are turned on and yourTV is set to display the appropriate video source.

You must put the remote in the correct mode bypressing the corresponding component key (TV,DVD, VCR, AUX, SAT·CBL) so the remote knowswhich component you want to operate.

Remove any obstacles between the remote and thecomponent. Make sure to aim the remote at the IRsensor on the component.

Make sure the batteries are fresh and are properlyinstalled. Replace the batteries with two new AAAbatteries, if necessary. Reprogramming may berequired.

Reset the remote details are here. , reinstall the batteries,and press the ON·OFF key. If the indicatorlight lights up, reprogram the remote and try again.If it doesn’t light up, replace the batteries with newones

Was this answer helpful?

Score 0
Add a comment

Add your answer

Antonio Monteiro will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 92