This versatile wireless broadband router released by Verizon in 2006 supports Ethernet and Wi-Fi networks.

3 Questions View all

Why won't my wireless router turn on?

My router is plugged into the power supply from the wall, and all cords are connected properly. The device will not power on and none of the LEDs are lighting up. What is going on?

Answer this question I have this problem too

Is this a good question?

Score 5
Add a comment
Deck the Halls
With tools and Fix Kits

3 Answers

First, make sure that your power source is functional. Hopefully, by switching to another power source, the router will turn on and you will not need to fix anything with the router itself.

If the router is at fault, the power port may be damaged or you may need to replace your LEDs. Check the repair manuals and the Troubleshooting Guide for help.

Was this answer helpful?

Score 0
Add a comment

Wire may be loose..tight it

Was this answer helpful?

Score 0
Add a comment

Do you have a multi-meter? You can test the power supply to make sure it's putting out the proper voltage, if it's junk you could get a replacement, but if the talkbroadbox is bad, then you're looking at replacement. If the power supply is good, plug it into the Broadtalk box and when it's inserted try putting a little, very little pressure on the connection at the box in a circular motion. Sometimes the poles that connect the power plug into the main bord can break, if they have, you could probably have it seviced, unless you know how to do that, but if you don.......DON'T. You don't need a fire because you wanted to save a couple of dollars. Also check the cable from the power converter to the connector, make sure it isn't cut or show any excessive wear and tear. Ping 192.168.1.1 then internet speed test

Was this answer helpful?

Score 0
Add a comment

Add your answer

James Carby will be eternally grateful.
View Statistics:

Past 24 Hours: 7

Past 7 Days: 90

Past 30 Days: 469

All Time: 16,697