Fix Your Stuff Community Store

Model A1288 / 8, 16, or 32 GB capacity

451 Questions View all

Options

2nd Gen iPod won't turn on after replacing Lcd and digitizer.

I recently bought an ipod touch 2nd Gen with a broken screen thinking it to be an easy fix. When the pieces arrived it and I replaced the old LCD and digitizer I noticed that the ipod wouldn't start. I tried everything to get it to turn on, I used different chargers, but I couldn't even get the dead battery logo.

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

After LCD replacement it requires a reboot.

Press home button and power button while its connected to charger until you see apple logo or battery charging image. Normally 20 seconds enough.

I hope power button and home button works well todo that. You can not be sure about home button since it came with new digitizer.

Good luck ...

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Josue Zuniga will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 100