I have a water damaged iPod Touch to fix, please read!

This Ipod will turn on except the screen is so dim you can barley tell it is on, and yes the brightness is all the way up. Do I just need to replace the screen? Thanks for any feedback!

~Oscar Garcia

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

Chosen Solution

Oscar Garcia, it is the LCD to contains to backlight, but the coil and the IC to supply the power to the backlight are on the logic board. You need to make sure that you cleaned the board as well as all the connectors properly. Use 90%+ isopropyl alcohol and a soft brush for that. Replace your battery, reassemble your iPod and re-evaluate. If it is still dim, I would start by replacing the display assembly and work my way up from there. Hope this helps, good luck.

Was this answer helpful?

Score 1

Comments:

Thanks that really helps!

~Oscar Garcia

by

Also if you have time it would be helpful if you took a look at my ifixit meta question!

~Oscar Garcia

by

Thank you for accepting my answer. Just looked at your great question on Meta. I am going to give you a detailed answer as soon as I have a bit of time. Got to work tomorrow so I'll need a bit of time. You'll get a few answers from others and pay good attention to what people are telling you. The upmost important thing, keep on learning everyday something new and different :-)

by

Add a comment

Add your answer

Oscar Garcia will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 75