Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

174 Questions View all

LCD cuts out randomly, connection okay?

After repairing a cracked digi for a customers iPad 3, he brought it back in after a few months complaining that the LCD was cutting out randomly. Looking at it myself, it's exactly that - the LCD just goes to sleep at its own volition, and pressing the power or home buttons turns it back on normally. So I popped the digi off and found that the little black plastic "lock" for the LCD cable was broken off. The cable was fully seated, but I reseated it anyway, and then put some electrical tape over it. Before I closed everything up I checked it thoroughly, shaking it around and whatnot to see if I could replicate the problem; everything seemed okay so I sealed it up.

Wouldn't you know it, as soon as everything's back together, it starts going to sleep randomly again! Has anyone seen something like this before, or have any ideas?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

When closing everything up it sounds like you are creating stress on a cable or it could be a software issue (setting it to sleep early?). I think the only other thing to try is another LCD assembly + digi.

Good Luck!

Was this answer helpful?

Score 0
Add a comment

Add your answer

mansedan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 170