Skip to main content

Acer Iconia A100 Battery Replacement

What you need

  1. Acer Iconia A100 Battery Replacement, Battery: step 1, image 1 of 1
    • Start at any side of the tablet.

    • Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.

    • Work your way around the tablet.

    • There are four side pieces in total.

  2. Acer Iconia A100 Battery Replacement: step 2, image 1 of 1
    • Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.

  3. Acer Iconia A100 Battery Replacement: step 3, image 1 of 1
    • Carefully separate the back piece from the device using a plastic opening tool.

    • Remember to open along the entire perimeter of the tablet.

  4. Acer Iconia A100 Battery Replacement: step 4, image 1 of 1
    • Turn the tablet over so that the battery is facing upwards.

    • Remove the four 4mm screws located around the battery.

  5. Acer Iconia A100 Battery Replacement: step 5, image 1 of 2 Acer Iconia A100 Battery Replacement: step 5, image 2 of 2
    • Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.

    • Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.

    • Be sure to not have any water around the device while removing the battery.

    • Be sure to be cautious while removing the battery and remove carefully; avoid ripping the wires attached to the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Omar Acosta

Member since: 03/03/15

526 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 1,830