internal RF port location
How can I find out the RF antenna port location inside the phone. I want to connect an external wired RF cable to that port for some testing purpose.
Is this a good question?
Score
-1
80752
1 Answer
Most Helpful Answer
Rep: 782.8k
1.1k
893
2.3k
Alok Gaur, may be this will show what you are after. Otherwise, have you consider using the antenna module as a tracing point.
Was this answer helpful?
Score
1
3 Comments
Thanks for your response.
Yes, I would like to use antenna module located on the phone, but how can I find it. Where is the antenna module in this picture?
by Alok Gaur
Pull your module and use the copper contacts where the module connects to the logic board
by oldturkey03
Yes, I have taken out the module. But I see two RF ports on the PCB. In the Phone schematic these are numbered as X7001 and x7002. How to figureout whichone I should use to solder an external RF cable.
by Alok Gaur