Fix Your Stuff Community Store

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Questions View all
Question Closed

Options

Touchscreen does not respond even after replacing the digitizer.

my touchscreen is not responding even after hard reset or set it up as a new one.

every other bottom works.

when i put the ipad in to the fridge for a few minutes the touchscreen works perfekt for 2 minutes and then it does not respond again.

so i replaced the digitizer with a new one but i have the excact problem again.

the only way to use it is to cool it a short time in the fride when its turned on and than the touchscreen does not respond again after several minutes.

could it be a heat problem? what can i do to fix it? i hope anyone can help me.

sorry for my bad englisch :)

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Did you flip the locking connectors down tightly on the logic board when you inserted the digitzer cable ? Also make sure that you have the cable in far enough so that the white line on the digitizer cable is next to the FPC connector.

Was this answer helpful?

Yes No
Score 2
Add a comment
View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 147