Replaced the glass and digitizer on the mini. Touch function seems to be working. Lcd is Fine. After a brief interval of use the ipad just shuts down. It locked up on another try and then shut down after holding for about a minute. I ordered a pre assembled screen with the chip and pre adhesive applied...
Any ideas on why this thing is shutting down like this?
Is this a good question?
Rep: 1k
4
1
2
On the new digitizer you have new magnet cover detertors. You may have problem with those. The best way is turning off the settings->general->lock/unlock OFF.
That may solve the problem completely.
Good luck...
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 1
All Time: 229
