This is my first go at replacing an ipod touch 4g. I carefully disassembled the ipod and then attached the new screen and LCD. No cables to the mother board are ripped and the LCD is snapped into place, so i'm kind of kind of confused why it is not turning on. I have even tried another screen. is there anything else i need to check?
Is this a good question?
Rep: 6.1k
15
20
5
have you tried hard reset by pressing the home button and power button at the same time?
Was this answer helpful?
Rep: 720
7
4
3
If a hard reset does not fix the issue, try following the top two answers on this question: iPod won't power on after screen replacement, even when plugged in
Was this answer helpful?
alright thanks guys i was able to get it to turn on by grounding it. but it won't let me power down with the power button. any tips?
Try making sure that the power flex cable is properly connected to the logic board.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 2,699
