Hi guys. I get a little problem that never I seen.... The touch screen only work in the upper side ..... But not woks in de lower side ... I disassembly the touch screen and clean the components ... And assembly but the problem persist ... I don't know what do ...
What you recommend me??
Is this a good question?
Rep: 782.4k
1.1k
893
2.3k
oscar, in my experience when a digitizer does not work at a particular position, it is the digitizer circuit that has failed. Contact the vendor where you bought it from and replace it with a new one. Hope this helps, good luck.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 169
