iPad 2 Bluetooth/Wi-Fi Antenna

$14.95

Product code: IF110-001-1
Apple Part #: 821-1317, 821-1156-A, 821-1586-A

Click Image To Zoom

 
 
 
 

iPad 2 Bluetooth/Wi-Fi Antenna

$14.95

Product code: IF110-001-1
Apple Part #: 821-1317, 821-1156-A, 821-1586-A

Product Overview

Keep your iPad 2 connected.

  • Replacement antenna for both Bluetooth and Wi-Fi connectivity.
  • Sits below front panel at the bottom of the iPad.

Does not work in iPad 2 model identifier iPad2,4 (EMC 2560). If you purchased a 16GB iPad 2 WiFi after March 25, 2012, this part may not work for you. You can verify the model by going to 'Settings" on you iPad and navigating to "General" and then looking at "Model."

Compatibility

Identify your iPad

  • All iPad 2 devices (excluding EMC 2560)

Product Details

  $14.95

 
 

Condition:

New

Warranty:

One year warranty

50+ Available

Add to Cart
 

Replacement Guides

iPad 2 CDMA

Difficulty: Very difficult

iPad 2 GSM

Difficulty: Very difficult

iPad 2 Wi-Fi EMC 2415

Difficulty: Very difficult

 

Compatibility

iPad 2 CDMA
16 GB
32 GB
64 GB
iPad 2 GSM
16 GB
32 GB
64 GB
iPad 2 Wi-Fi EMC 2415
16 GB (EMC 2415)
32 GB
64 GB
 

Stories

My Problem

Had the ipad 2 digitizer replaced a year or so ago at a shopping mall outfit. It worked but the new digitizer had some little annoying streaks and in time became detached. So instead of having redone by some one else, decided to do it myself.

My Fix

The repair went really well, even though the digitizer was already partially coming off, it still needed a good heat up to detach the remainder. The wifi antenna was damaged, and it seems to have been done by the previous repair. So in hind-site, I should have ordered the antenna at the same time I ordered the new digitizer, it is cheap enough, even if you don't need to use it. Clean up is important and take your time doing it, but reassembly goes together really fast. In fact the hardest job was cleaning the lcd screen from any fingerprints or smudges.

Once that was done it just closes up and thats it, done. I was sorely tempted to replace the batteries at he same time, but am quite confident that its something that can be done later when its really needed. Great suppliers of replacement parts and info on how to get the repair done.

My Advice

For the removal of any smears, smudges or finger prints, I found denatured alcohol diluted with water and applied with spectacle cloth to do the trick nicely and then all it needed was a gentle wipe with a dry spec cloth to polish off any residue. The denatured alcohol was also great for removing any remaining adhesive from the frame.

My Problem

The wifi cable was severed when I removed the cracked screen.

My Fix

It started out as a simple cracked glass repair job! ( insert laughter here)

So I got the glass off ok , cleaned up the frame a bit and installed the new glass . I pushed power and nothing ... Dam , so I don't quit I plugged in the usb power and yes ! It came on . But no wifi .. Shoot ok I pull it apart and sure enough the wifi cable was damaged . I ordrerd new one and read all the how too . I found a good one on you tube (sorry i fixit ). Was a lot quicker and I didn't have to remove the mobo ! Nice . Any way I installed the new wifi and it's working great . Next up the power button .

My Advice

Funny thing is , I found an icloud locked iPad 2 in perfect condition that I was gonna just swap out the mobo with mine , but that would have been too easy and I wouldn't have learned a new skill ;-)

My Problem

After cutting the wifi antenna wire while removing the broken ipad screen, I learned that this happens to almost every first time repairer.

My Fix

The connector is the size of the head of a pin, so be prepared for some frustration. Once connected, it was just a matter of lining up the mounting holes with the holes in the iPad and getting the screws in place. That wasn't bad since the screwdriver was magnetized.

My Advice

It will happen to you, so wherever you order the screen (aka digitizer) from, go ahead and spring for the wifi antenna. The iFixit antenna actually improved performance over the original antenna, but I wouldn't replace the original antenna just for that.

My Problem

Knicked the antenna while replacing the front panel.

My Fix

Really well got it all buttoned up and it works fine. Interested in seeing how it works in the long term.

My Advice

Be careful with the screw in cord holder it comes off easily and I had to tape it on before I mounted the antenna.

My Problem

Broke my antenna while replacing my digitizer.

My Fix

After i got my antenna from ifixit and installed it, my wifi was 100% again.

My Advice

Bought 2 antennas from other companies and wifi was poor, found on forums to try ifixit product and the wifi was excellent. Will always buy my apple partts products from them.

My Problem

I had dropped my iPad 2 and cracked the front panel... twice, and on two corners.

My Fix

I used the guides. All went well. I am glad I ordered all of the parts I did. As it turned out I damaged the Wi-fi antenna when taking the front off. I put everything back together, including the new antenna... unfortunately there was no Wi-Fi... I contacted customer support, via email, and within two hours Matt had new antenna shipped out via priority mail. I installed the new antenna this morning. I am happy to report that all is well!

My Advice

Definitely order that antenna just in case you toast yours like I did. The Front Panel assembly is a better deal than just the glass, as it turned out I did not need the bezel replacement, but it is good to have jut in case. The opening kit worked well. heating the gel filled pad for 30 sec worked for me.

It was a good experience, do not be afraid to attempt this fix. Oh smallest Phillips bit in my Ifixit tool set worked great. The magnetic tip is essential. I also used the magnetic mat to keep the screws in one place. The white and black grid helps keep the screws in order, and more importantly keeps them in one spot so you are not faced with the prospect of getting on your hands an knees searching for TINY screws on the floor.

My Problem

While removing the screen I ripped the antenna, which to you who know is pretty easy to do.

My Fix

I first bought a cheap antenna from a vendor that I usually use. I thought it would be an easy fix. I told the customer that i would have it done in no time. Once I put the cheap antenna in there was little to no wifi reception. I ordered from ifixit.com and paid a little more for the part. It works perfectly now.

My Advice

Be very cautious when purchasing cheap parts for any device...

My Problem

Purchased a cheap ipad 2 Wi-Fi Antenna, installed it and could only get connected right at the router. Someone on the Apple Community page suggested trying an antenna from ifixit.

My Fix

Installed the ifixit antenna and my ipad2 is back working like it did when it was new.

My Advice

Be a little skeptical when buying cheap ipad parts.

My Problem

Display was broken

My Fix

Removed the front gently with iFixit heater.

Replaced the WiFi antenna and mount the new front.

The only negative thing was the glue down in the right corner. Tried to reheat that corner and hold it down, but that work only for a wild. After a few minute the front give a little opening.

My Advice

The strip with glue could be better.

My Problem

shattered front screen

My Fix

it was hard but now i know the inside of an iPad and probably could do it again

My Advice

agree with taping the broken front screen so its easier to pick up the broken bits. never forced the iPad, keep heating it.