Student-Contributed Wiki

Student-Contributed Wiki

An awesome student from our education program made this wiki. It is not managed by iFixit staff.

Sony Handycam DCR-SR42 Troubleshooting

Error

Invalid flag specified. Perhaps you forgot a bracket, or used the wrong identifier?

Example:

[flag|<flag id>]

Current text:

[flag|diaster]

Camera won't turn on ¶ 

The camera won't turn on even when the switch is in the on position

Dead battery ¶ 

Ensure that the battery is not dead by plugging the camera in and allowing it to charge. It may take at least 15 minutes of charging before the camera turns on. Allow the battery to charge fully before unplugging the camera.

Hard drive is broken ¶ 

If the camera doesn't turn on even after the battery has been charged, the hard drive may be defective and may need to be replaced.

Doesn’t operate when power is on ¶ 

The camera powers up, but doesn't allow the user to record or access menus.

Temperature too high or too low ¶ 

The camera may have over heated or exposed to cold temperatures for too long.

Turn off the camera and allow it to sit in a dry environment at room temperature for an hour.

Screen is broken ¶ 

If the camera powers up but nothing is displayed on the screen, the screen may need to be replaced.

Camera won't connect with computer ¶ 

The camera will not upload photos and videos to a desktop computer

Ensure cable is securely connected to computer ¶ 

Unplug the USB cable and plug it back into the computer to ensure that the cable is fully plugged in.

Ensure cable is not connected through USB hub ¶ 

USB hubs are not supported for use with this camera. The USB cable must be connected directly from the camera to the computer.

Re-install usb driver ¶ 

If the USB cable is securely plugged into the computer but the computer still cannot access files on the camera, try uninstalling and re-installing the USB driver.

Camera won’t record image/video ¶ 

The camera is functional but doesn't save videos or images

Hard drive is full ¶ 

If the memory of the hard drive is full the camera might fail to capture an image or record a video. Try relieving some space by deleting some photos and videos. If you take a lot of photos or videos you might need to buy a hard drive with more memory.

Temperature is too high/low ¶ 

If the temperature of the camcorder is low, turn it off and take it to a warm place. Also, if the temperature of the camcorder is high, turn it off and leave it for a while in a cool place.

Hard drive is broken ¶ 

If the hard drive is broken, it would not record a video or capture a photo. The ideal thing to do in this case is to replace the hard drive.

Camera stops recording abruptly ¶ 

The camera suddenly stops recording a video

Hard drive is full ¶ 

If the memory of the hard drive is full the camera might fail to capture an image or record a video. Try relieving some space by deleting some photos and videos. If you take a lot of photos or videos you might need to buy a hard drive with more memory.

Battery is dead ¶ 

If the battery is dead, plug the camera's charger to a power outlet, and also to the charging port of the camera. Ensure that the power outlet is functional.

Temperature is too high ¶ 

If the temperature of the camcorder is high, turn it off and leave it for a while in a cool place.

Camera was shaken ¶ 

The internal hard drive of the camcorder may have been disrupted during the recording process leading it to stop abruptly. Restart and hold the camera in a firm position

Recording is blurry ¶ 

The camera records but its content is not clear or its content is blurry.

Auto-focus camera ¶ 

To focus the camera automatically, touch "AUTO" then "OK"

Lens is cracked ¶ 

If the lens is cracked, the LCD would not display optimum visual quality. You need to get the lens replaced.

Recorded sound is too quiet ¶ 

Volume of the sound output is low. Unable to hear clearly

Volume must be turned up ¶ 

To turn up the volume, touch "OPTION" "TAB" "VOLUME" then "+" on the camcorder.

MICREF level must be set to high ¶ 

During recording low volume sets, the MICREF must be set to high in order to pick up all of the sounds

Wavy lines on screen ¶ 

The camera appears to be working, however the display screen shows pixelated lines

Flex cable is broken ¶ 

You can repair the LCD Display by removing the broken Flex Cable and replacing it with a new one.

One Comment

every time I record a video or capture a photo it restart saying reovring data because of which I miss the moments to capture, any solution

Riyan qureshi - Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 18

All Time: 854