The device does not turn on ¶ 

Drained/bad battery ¶ 

Replace with two new AAA batteries

Broken battery harness ¶ 

See the Installing a Battery Harness Guide for the Sony Clie PEG-SL10.

The screen is frozen ¶ 

The buttons and stylus will not work, and the same screen is laughing in your face! Instead of throwing your Clie, try these simple steps.

Device requires a soft reset ¶ 

1.) Unscrew the top of the stylus, exposing the "reset tip"

2.) Turn the Clie over

3.) Place the "reset tip" into the reset hole and gently push until you feel a soft click

4.) Remove the "reset tip"

Device requires a hard reset ¶ 

WARNING: Performing a hard reset will cause the device to lose all data!

1.) Unscrew the top of the stylus

2.) Turn the Clie over

3.) Hold the POWER button

4.) Place the "reset tip" into the reset hole while holding the POWER button and gently push until you feel a soft click

5.) Release the POWER button after three seconds and remove the "reset tip"

6.) Turn the Clie over and accept the warning message stating all data will be erased

The hard reset is not solving my problems ¶ 

Calm down, there is help on the way, but it will require patience!

1.) Remove the batteries from the device

2.) Allow the device to sit for twelve hours

3.) Insert the batteries

4.) Turn the device on

The scroll wheel is not working ¶ 

Broken scroll wheel ¶ 

See the Installing a Scroll Wheel Guide for the Sony Clie PEG-SL10

I think I fried my motherboard ¶ 

Fried motherboard ¶ 

See the Installing a Motherboard Guide for the Sony Clie PEG-SL10

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 546