Student In Progress
This wiki is being worked on by hardworking students.
Nostalgia GCM200's various components are given with names, how to open and replace each part of Gummy Candy maker Device. Each step has given with step by step instruction & pictures. So, Good Luck Genius !!!
The Individual Parts of the Device Nostalgia_GCM200 Gummy Candy Maker ¶
Plastic Tray & Mold
Total 4 Trays and 4 Molds
Tools that you need to open ¶
Phillip Screw Driver and Spanner S6 ¶
Spanner bit Driver
Phillip & Spanner Screws and drivers
Philip Screw Driver
The Teardown of the Device ¶
Nostalgia_GCM200 Gumy Candy Maker ¶
Step 1a. Remove the two Phillips head screws.
Step 1b. Remove the last screw with the Spanner Driver.
Step 2. Split the device in half to expose the internal parts of the device.
Step 3. Depress the little tab inside the top portion of the device to remove the On/Off switch.
Step 4. The power cable is attached to the On/Off switch and can be removed to be replaced if there is any damage to the cord.
Step 5. Remove the two screws from both sides of the heating coil to replace the heating coil or the heating pan.
Step 6. Remove the heating coil and then remove the pan from the plastic. This can be replaced if it is damaged.
Step 7. Replace heating coil if it no longer heats the heating tray.
Last Step 8. Repeat all steps in reverse order to put the device back together.