Skip to main content
Help

Revision to Nutri Ninja Ninja Blender Duo BL641 Troubleshooting

Nathan

''The blades are not moving or are not moving as they should''
 
'''Damaged MotorMotherboard'''
'''Damaged MotorMotherboard'''
 
If there is no sound coming from the blender when the blades should be turning it could be the motormotherboard's connection is brokenbad and the motherboard needs to be replaced.
If there is no sound coming from the blender when the blades should be turning it could be the motormotherboard's connection is brokenbad and the motherboard needs to be replaced.
 
'''Jammed or Damaged Gears'''== Blender Overheats ==
'''Jammed or Damaged Gears'''== Blender Overheats ==
 
If there''Blender gets very warm or shuts down while running''

If this
is a sound of the motor tryingcase the fan likely needs to turn but the blades still are not spinning, the gears could be jammed, broken/stripped, or knocked out of place. You will need to take apart the gear assembly and may need to replace a gearreplaced.
If there''Blender gets very warm or shuts down while running''

If this
is a sound of the motor tryingcase the fan likely needs to turn but the blades still are not spinning, the gears could be jammed, broken/stripped, or knocked out of place. You will need to take apart the gear assembly and may need to replace a gearreplaced.
 
== Leaking Blender ==
'''Blender Still Will Not Turn On'''
 
This may be due to a problem with the power cord, meaning the whole unit may need to be replaced, or the motor may be damaged and needing towhich can be replaced.
This may be due to a problem with the power cord, meaning the whole unit may need to be replaced, or the motor may be damaged and needing towhich can be replaced.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes