Skip to main content
Help

Revision to Anki Vector Troubleshooting

Samuel Leingang

Do not use a captive portal network which is not supported. Examples include networks associated with academics, hotels, airports, shopping centers, etc.
-=== Device Error ===
+=== Vector is Not Operating Properly ===
Reboot Vector in recovery mode and erase the user data by following [https://support.anki.com/hc/en-us/articles/360009804394-|this guide]
Reboot your Bluetooth device
-=== Device Error ===
+=== Glitch in the Firmware ===
Reboot Vector in recovery mode and erase the user data by following [https://support.anki.com/hc/en-us/articles/360009804394-|this guide]
=== Accent Error ===
-Configure Vector’s language to correspond to your accent, not location.
+Open the Vector app and go to settings then go to Preferences to change the language. Remember to choose your language preference depending on your accent not on your physical location.
=== Use Of Unsupported Commands ===
-refer to the Vector app for a list of valid commands
+Refer to the Vector app for a list of valid Voice Commands. An addition source of the Vector Voice Commands can be found [https://github.com/lukemerrett/Anki-Vector-Command-List/blob/master/README.md|here].
=== Insufficient Charge ===
''Vector is inaudible and is not producing response sounds when prompted''
-=== Device Error ===
-
-Reboot Vector
-
=== Volume Is Set Too Low ===
Adjust the volume slider located in the settings of the Vector app.
+
+=== Volume Adjustment Does Not Work ===
+
+Reboot Vector by holding down his back button to turn him off and then hold the button again to turn him back on.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes