Bose Wave Radio AWR1-1W Troubleshooting

bose AWRC1 remote old and new does not work with new bateries

cd will work when i unplug unit

clock works

thx E

both remotes do not turn unit on

I can play one cd with sound. The radio has no sound. Also, I can't get the attached 5 disc cd to play.

Signed , frustrated in NC

My Bose radio plays fine for @ 15 min then popping and static noises and after @20 min of static no sound. I turn it off and on again with remote and it plays fine and the cycle starts again. ever hear of this ?

My system will not come on with the remote. I have replaced the remote battery. There is no manual power button!

MDS

you would thank for 600.00$ for the wave that bose would have a teck on the pay roll ????????

My bose wave will not show discoverable when I press and hold preset 5 button I have also tried unplugging and still will not let me connect bluetooth

Bose will not power up it is a wave 2004

I have read a lot of post but not helpful..

Can anyone help

Went to change to DST and now the time is stuck on 2:56 PM and will not change. Trying to adjust with the clock button is useless NOTHING happens!

Display doesn’t change. No functions work.

Replaced battery but volume won't go up or down

Can’t change the clock. Tried holding down the + or the - buttons. The set clock message doesn’t display.

The C D will not play most times.  Once in a while it will play after  C D is about 15 minutes.  Everything else works      What is wrong?

I get interference on the speakers from the radio, even when playing music from a CD or from my Ipod. It seems the radio will not turn off. I have tried factory reset.

I have the Bose AWR 1-1W wave radio, which works just fine. The problem I have, after taking it apart is the antanee connection that is soldered to the circuit board. I would like to just buy the connection, not a whole unit.

My Bose Wave radio’s display is not showing any settings.

Hi Maelyn.. Philip Ross , Palm Beach County , PALM BEACH COUNTY, did Bose ever resolve your Bose Wave Music Wave. Let me know either here or on FB / pross7677@aol.com. I dont want to spend anotjer $579.00 ..have a nice Sunday

I have absolutely no sound? What is Happening?

The digital clock on the wave is running fast. Is there an adjustment to slow it down? 8-17-2020

I have a Bose Wave Radio AWRC-1G that has low level crackling buzzing sound in left speaker when I play the CD player. Its not present on the radio and doesn't matter what CD I play. Suggestions?

The display will not return to time after alarm 1 is set. Any ideas concerning remedy?

after time properly set hours later it change

How can I adjust sound on my Wave Radio

No sound from the radio no matter what you try to do. No LED. Once in a while when you plug in the power, ALL L E D’s go on at once and there is no control of them. Unplug and re-plug and that results in no L E D’s and no way to get them on

My wave radio it say please wait

If could help

My bose wave powers on, all lights are on as if it is working but I have no sound regardless of selected mode. Remotes change the volume, mode, radio station, cd selection, everything just no sound.

I CANNOT GET ANY SOUND., i THINK THE ALARM IS SET. BUT DON’T KNOW HOW TO DISABLE IT.

My Boise is ruining my CD’s , they skip all the time, my husband is so frustrated with it.

What can we do to keep this from happening.

When I turn on my Bose radio a message come up please wait

Keeps flashing please wait. So I wait and nothing happens.

This site is bull $@$*. It offers no solutions

on cd play all cds , esp near the start, are stopping playing and giving out ‘static’ hachine gun type rhythmic ‘tatting’

Mark Day

how to stop flashing green message—”please wait”

I have a Bose Wave Radio that does not work. Do you want it? If not it’s going in the landfill.

fowlerarch@aol.com

Whenoturn radio on there is about 8 digits on the display screen they will not go away, I can’t set my clock to the correct time and have it display

Display issues, When I turn the radio on instead of the clock I have a bunch of random numbers. I try to set the clock but I can’t see it because the random numbers remain on the display. Any suggestions? I tried to reset it by removing the battery and installing a new one still same issue.

Bose radio plugged in and battery replaced. It will not turn on. No display nor sound.

wherem are the solutions to the questions?

Our Bose model AWR1-1W works fine with the cabinet controls, but not with the remote. We tried using a neighbor’s remote. That didn’t work either. Our remote was replaced with a new one from Bose several months ago. Should we try the purchase of a new remote?

My wave 3 stopped working. During the night it flashed a message and then the display would go dark then it would come back on get bright start flashing than go dark repeat repeat. Since then no sound speakers or head set.

Will not eject cd

My Bose wave system won't play and shows "please wait" on screen with every remote activation. Help.

Getting a “please wait “ on the screen and the radio will not play

The "please wait" as well as CD player issues are often caused by the electrolytic capacitors on the main PCB going bad.

The only way to resolve the issue is to replace the 30+ capacitors or the mainboard itself.

You can buy capacitor replacement kits on ebay for around $90, but it is no easy task to do. The kits are usually through-hole capacitors and the original caps are surface mount, so every one has to be finessed into place, making sure they sit low enough so the CD drive does not hit them when it goes back into place. I am quite skilled in this type of work and it took me about 4 hours to rework my parent's radio.

I think I have also seen someone offering a refurbish service for ~$200, which is the route I would go if I needed to do it again. My time is worth more than the extra $100 for someone else to do the work.

Everything is lite up on screen. Nothing can be turned off. I have replaced all the batteries and unplugged the radio. When you plug it back in everything on no sound 5 or 6 numbers on screen, aux, clock, alarm and volume on with no sound.

Light flashing in the back of the unit. White light. Unplugged and reconnnected and it stopped flashing.

Just picked up a Wave Music System lll (3). Remote functions as it should less the 'alarm 2' and the 'alarm setup/menu' buttons. When either is pressed, an acknowledgement flash occurs on the unit just as it does when pressing any other button. The remote's IR emitter also lights for both buttons when viewed through an old Samsung cell phone camera. As a result, I can not get into the 'setup menu' to do a factory reset.

The closest scenario I could find after hours of searching was a YouTube repair of failed 'up volume' button that was fixed by inserting a foil dot between the button and its contact.

My best guess is a noisy button contact in the remote, or a firmware corruption in the remote or the unit. I do have an ISO firmware upgrade found on the internet archive (https://ia902503.us.archive.org/31/items...) but have no CD to copy it to and don't know if I need to enter setup to apply the upgrade.

Any thoughts would be appreciated.

The above link is fine but it starts the download. it should be https://archive.org/details/seine-04.04....

Cant eject disc

Press Clock Set and Volumn Down to hide display illuminations.

Bose wave radio display says “please wait”

Clock works fine, radio will occasionally play fine.

Have used canned air to blow out dust.

Clock is illuminated, cannot get radio or CD to play. Have done the reset several times. Replaced the battery with no luck. Can change time, volumn, select CD or radio, can change radio stations

No sound...