No Image on DisplayHello Everybody, I'm new here and I try to do my best with my english. My ACD 24" Don't work. It will be not detected from my...
Answer to: Damaged display power header whilst replacing hard disk driveDear Friend, I had the same problem. The connector you need is from Molex. Excatcly the same is not possible to buy, because was made just for Apple LG. I find by Molex the connector has this part number 53780-0670. I purchase it from Mouser electronics under 2€. I think is the same, just not black but white. You can replace it or someone who can fine solder. Yo save a lot of money, believe me! I hope I can help you with this information. Let me know. Bye Bye Update: Hello Adam, If I understand the part you me must be this one http://www.digikey.com/product-detail/en/BLM18PG221SN1D/490-5221-1-ND/1948397 It is a ferrite chip who are responsible for the 12v on LCD Display port. I tok this information from the schematic of Imac 21,5" who has the same connector. I hope this is the part you need. Good Luck! Yako