iPhone 3G battery wont charge and wont connect to itunesI have an iphone 3g which has been completely stripped down. I have put a new screen in, new power ribbon and new dock connec...
Answer to: rrod death kit fix did not workYou need to have the following reflowed: ram chips and both processors. I have a chap in Cornwall UK has does my reflow's. A reflow is where you melt the solder under the chips and allow them to make a good contact again. The xclamp fix is only a temporary repair and only works 80% of the time (in my experience). A reflow is what you need my friend.
Answer to: Power button replacement not workingThey can be quire fiddly to install, I have done many myself. Also bear in mind that the rear case might be too tight around the power button. I have had a few where I have had to use a small file and make the power button hole a little bigger for the button to move in and out. Also sometimes if the screws are done up too tight it can stop the button from operating correctly.
Answer to: After repair, won't charge or connect, proximity sensor also busted.Can I ask did we ever get to a resolution / what might be the problem on this topic, I have the same issue