30 pin smd dock connector replacement Nano 5GThe smd dock connector on my 5th gen Nano is broken, would anyone know where i could purchase a new one?
Answer to: 30 pin dock connect has a feww broken pinsThe 30 pin connector is usually replaced when it has pin damage. Although the outside plug might look similar on most models, the actual way the connection is made to the logic board differs from model to model. I hope this helps a little.
Answer to: coil for backlight problemyou can find them on Ebay here is just one listing http://www.ebay.com/itm/New-6R8-Coil-Apple-iPhone-3GS-Dim-Backlight-/330611148098?pt=LH_DefaultDomain_0&hash... should be the same coil for the nano
Answer to: problem after replacing iPod screen (unlock slide dosnt work)Make sure the connector is firmly in its place, sometimes the connector not being fully seated will cause this. You might also check the flex cable on the digitizer, they tend to tear easily when you install them. You might also just have a defective digitizer, try another one or the old one if it works and see if that's the case.