Screw identification help iPhone 4Does anybody have a layout of what screws go into which hole? There are several obvious locations for the washers and broad h...
Answer to: Ear speaker on iPhone 4 suddenly very low, near mute.Have you taken a closer look at the speaker assembly? Making sure the pins are not bent and that it's secured to the induction flex proximity sensor? http://guide-images.ifixit.net/igi/qV35fCGFMYeHrhYe.h... The location that the speaker connects to is part of the induction flex ribbon cable. http://www1.dealextreme.com/productimage... It's often overlooked that you have to remove this part in order to fix this ribbon. It wasn't very securely attached to the ribbon so I think this should be worth a look. The only downside is you have to remove the logic board to look into this. http://guide-images.ifixit.net/igi/mXXSHImkINJcBFxh.h... I had some buzzing and low volume from my iPhone and reseating the speaker to the cable fixed it.