Error code 6700 - No movement after startup?I am truly stumped I was originally getting an error code 5100 which according to the poor canon documentation stated there w...
Answer to: Logic board corrosion fix not working?I wouldn't recommend reflow in an oven - you might be damaging the plastic parts/connectors You should have worked backwards from where you thought the problem originated. Try searching for a schematic and test the board to see what you can do. If not - look for a super sonic cleaning service. It will do what a toothbrush cant and remove corrosion from underneath the BGA chips Check the board and make sure you didnt remove any components as well while cleaning/heating
Answer to: iPhone 5 is charging, but is not, but is?Hey - the charging connecter/port is a separate module, why don't you reopen it and make sure that it is seated correctly. Also is anything hot/warm to the touch. Something may be shorting.
Answer to: How to Replace broken accellerometer?Hey - what are you trying to do ? You would have to identify the chip - search for a replacement or salvage from a broken board, and since it will most likely be a BGA package you will need a hot air rework station. I would say a replacement should cost ~$15-$25 per chip