Display is having trouble refreshingHello, I have recently baught this phone and I didnt notice this until it was too late. The phone basicly works flawlessly, B...
Touch id is working very poorlyHello I have baught a iphone 5s and the touch id sensor has close to no functionality. Most likely the screen has been replac...
Answer to: iPhone 5s turned off won't come back onthe board might have died... does it get hot or any warm at all ?
Answer to: Screen unresponsive after replacement and flickeringIf the screen is fine while not seated, then most likely there is something appling pressure to it from the board side. Try assembling the phone without the cover plate of the lcd connectors and check all the other screws and plates if they are in place. ALSO check the rear antenna cable, it is protected by a metal plate and that plate can be easly missplaced if any speaker repairs were attempted. the plate must go underneath the speaker or it will apply pressure on the LCD.