Help
Event | Count | Delta |
---|---|---|
Someone completed your guide | 82 | 1980 |
Admin approved your guide | 11 | 1884 |
Post was voted up | 9 | 108 |
Answer accepted | 3 | 90 |
Someone liked your guide | 10 | 71 |
Accepted answer | 4 | 40 |
Post upvoted containing a link to your guide | 1 | 10 |
Voted down a post | 3 | -6 |
Post was voted down | 2 | -12 |
Your post deleted due to flags | 1 | -100 |
Thanks for the feed back
You can blow a circut causing iPad not to work
It would be a board level repair you can send out for microsoldering iPad rehab can do
Yes it is just like phones only on the iPad Air 2&3 and the Pro Series
Highly recommend not doing the screen repair without frame assembly but you can do it just have high chance of screen falling off, or cracking oled when claping it down
Rear camera hmm did you try repeating the connection did the cameras work before repair?
@bryce Stevenson tries connections also the ribbon cable connecting digitizer and LCD. I would assume the screen is faulty defective if that doesn’t work!
Depending on adhesive you use to put back glass
Samsung A50 i think is a screen 1st if device is off or
Depends on which Samsung your working on but this is the best way if you do just screen you would still have to take apart whole device to ensure you don't short circuit anything you must unplug battery!
Page 1 of 2
Next