Upgrading an 2017 iMac 27" with an off the shelf NMVe m.2 SSD + M.2 Apple PCIe adapter is definitely possible. I am amazed how much confusion information is on the internet about this topic. Even from OWC, which only wants to sell a SATA upgrade kit for the 2017 iMac. So I thought, try and find it out. I did my 2017 iMac with a EVO 970 NVMe SSD + Sintech M.2 NVMe to Apple PCEe adapter. I only recommend the Sintech adapters, others are known to have issues. I used: https://www.amazon.com/Sintech-M-2-PCIe-2280-SSD-Karte-MZ-JPU128T-SD6PQ4M-128G/dp/B01CWWAENG I have some images on instagram where I did my upgrade.: https://www.instagram.com/p/Bs0loRDga6c/ https://www.instagram.com/p/Bs06bPLAz1p/ I am happy I did it and got rid of the FusionDrive setup. As a note, if you plan to replace the SATA drive with an SSD, which I also did then "No" you do not need the overpriced and useless thermal Sensor from OWC either. I recommend the regular EVO not the EVO Plus or EVO Pro. If you still insist on using the non...
I used a Samsung EVO 970 NVMe and a Sintech M.2 to Apple PCIe Adapter. Also replaced the SATA HDD.. I couldnt be more happier with the result: See images I posted on Instagram: https://www.instagram.com/p/Bs0loRDga6c/ https://www.instagram.com/p/Bs06bPLAz1p/ Update: Do not buy the Samsung EVO 970 “Plus” version , the plus version is known not to work: https://www.instagram.com/p/BujHUcrg3Ra/
Ja, beim 2017er iMac übersieht man dieses Kabel sehr leicht beim Ausbau und Einbau. Da ich gestern mein iMac 27” mid 2017 geöffnet hatte um einen EVO 970 NVMe einzubauen, kann ich es dir genau sagen wo der sitzt. Hier ist es (Siehe Bild).
Bem iMac 27” mid 2017 empfehle die folgende Kombination: # Samsung EVO NVMe M.2 SSD # Sintech NGFF M.2 nVME SSD Adapter Das habe ich an meinem iMac 27” mid 2017 gemacht und bin echt zufrieden damit. Mehr platz und mehr speed als herkömmliche SATA SSD’s :-) Siehe hier: Habe auch weitere Bilder davon auf Instagram: https://www.instagram.com/p/Bs0loRDga6c/ https://www.instagram.com/p/Bs06bPLAz1p/ Solltest du dann überlegen zusätzlich Interne SATA HDD zu tauschen, so wie ich das gemacht habe dann geht das prinzipiel auch. Es ist auch wirklich kein temperatur Sensor nötig. Allerdings wirst du einen SATA Kabel kaufen müssen für deinen Logicboard wenn du keinen FusionDrive vorkonfiguriert hattest und einen 2.5” auf 3.5” HDD Rahmen. Hoffe das hilft dir weiter.