Page 1 of 4
Next
Be careful that it does not pull up all the foam strips, that was my issue.
Remove green tape over connectors, you can put back on later if it still is sticky enough.
Use the iFixIt Opener. You’ll have to find a large opening, seems like near a piece of tech is easier. Once you get a firm and deep opening, keep working it down.
Be careful around the camera if it sticks, use spudger to separate.
It seems like prying underneath the cords is better and won’t damage the motherboard’s black connector piece.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
Be careful that it does not pull up all the foam strips, that was my issue.
Remove green tape over connectors, you can put back on later if it still is sticky enough.
Use the iFixIt Opener. You’ll have to find a large opening, seems like near a piece of tech is easier. Once you get a firm and deep opening, keep working it down.
Be careful around the camera if it sticks, use spudger to separate.
It seems like prying underneath the cords is better and won’t damage the motherboard’s black connector piece.