Answer to "How can I replace my htc magic cover?"Replacing the front cover is easy, but I would absolutely not recommend to replace the body of the Magic. At least not with the housings that are sold on ebay. Reason is: the Bluetooth and GPS antennas are glued onto the body / middle part of the housing. You can see them as two stickers, one on the left and one the right side of the camera glass. Now, if you replace the body, BT and GPS won't work, because 99.9% of the housings sold on ebay don't contain these antennas and it's to risky to remove them from the original body. You have three choices: 1. Get an original housing (don't ask me where because I don't know) and try to replace it. 2. Only replace the front case, which is a pretty easy operation. Just don't buy the housings with only the HTC logos, because they are built very bad: - the vibrating motor will be stuck due to case design fail - the thread inserts in the four corners are too small (I busted three of my four screws) - the LEDs from the six buttons will shine through the case (although...