Device restarting on its ownHi I have a Samsung Galaxy s6 edge which I bought used and abused as defective. There was physical damage all over it so i tr...
Display not working, no startup sound after screen & frame replacementHi I just replaced the screen & frame on my xperia Z3. The screen doesn't turn on & there is no startup sound. When i press p...
Answer to: Display not working, no startup sound after screen & frame replacementThanks Ben for the input! It was a blown 0 ohm resistor on the logic board. It seems a pretty usual problem when swaping lcds or a complete frame and lcd like me. Could it be caused by higher power demand of the substitute lcd? Although the lcd itself looks identical to me (it was a cheap 30$ frame and lcd assembly)... I made a jumper using a tiny piece of copper wire and some conductive adhesive. Huh I was so relieved when it lit up. Seems to work fine. Can someone advise me if to replace the resistor or just leave it like this? The thing is soo tiny and in such an innaceslible place that I fiddled with the jumper for more than an hour... i wouldn't mess with it again if not absolutely neccessary.