tixahaga

If your USB is properly connected and still you have error because of drivers. Yes, because of old version of drivers. Just uninstall the old one and replace them wit new drivers which you should install from official Canon printer website. After installing drivers, run your scanner if still the error occurs then checkCanon Pixma Mg2570 Manual for other troubleshooting ideas.

Try the following methods to fix paper jam error: (1) Unplug your printer while it is on. Leave it for approx 30 min. Plug it back on. Sometimes this might resolve the issue. (2) Sometimes there is might be something probably inside your printer in some positions which blocks the paper sensor along the paper path in that positioned you can't see. (3) Remove the toner cartridge( if you are using) and shake your printer up and downside gently and carefully.Remove all ink cartridges and reinstall them one at time. Move the carriage over to far left and back in position. Re-position the encoder strip of print head carriage. (4) Ensure that your paper tray must not be over filled. Verify that papers are not packed too much tightlyin paper tray. I hope with all these tips you might resolve your issue. If still it shows paper jam error that means there is hardware failure. But don't worry check Epson Workforce Wf-2540 Manual for diagnosing and troubleshooting your printer.

Do following: (1) Verify that your printer tray is properly set. (2) Remove the object they they are placed in front of printer. (3) Clean if there is any piece of paper or something else in printer. (4) Clean the encoder strip with soft cloth. I hope with these points your issue might be resolved if not then check Canon Pixma Mg6350 Manual to troubleshoot your printer.

Check your Android > settings > Bluetooth and make sure your VA is NOT paired. Remove if it is. Now go into Garmin connect app > devices. Make sure your VA is paired there. Hope this might help you. In case, if you still face same issue check Garmin Vivoactive Manual and perform advanced initial bluetooth setup.