preziremprokletigugl
preziremprokletigugl
| 1 | Reputation |
| 0 | Solutions |
| 0 | Guides |
| Member Since 12/07/2016 | |
Cancel
Menu
Your Settings
Cancel
| 1 | Reputation |
| 0 | Solutions |
| 0 | Guides |
| Member Since 12/07/2016 | |
We have a chance to guarantee our right to repair electronic equipment—like smartphones, computers, and even farm equipment. This is a once-in-a-generation chance to protect local repair jobs—the corner mom-and-pop repair shops that keep getting squeezed out by manufacturers.
Join the cause and tell your state representative to support Right to Repair. Tell them you believe repair should be fair, affordable, and accessible. Stand up for your right to repair!
No SSD? What is this, something like eMMC??? O_o
It is just a more stable battery that can handle higher voltage without damage. Even my Cubot Note S has 4,35V max voltage battery (4.150 mAh).
Lel. Yeah. Those are just via stiching for shielding.
In company I work for, our boards are 22 layer…
Lead solder is the best.
Just buy a 240V rated cable. The 125V rated one, will work, and insulation will be more than sufficient. But you never know.
If the PSU does not have a ground pin, then what can you do. It will work, but if live touches some metal part of the case, that part will become live. And fuse will not activate.
Also, the power supply is not "dual voltage", because it does not only owrk with 2 different voltages. It works with wide range of voltages (for example fom 100V all the way to 240V, and everything in between). But it should say at what ranges of voltages it works.
It is not "dual-voltage". It works in the range od 100V to 240V. You can use it with 176V, for example...
Good design and quality Delta PSU.
Hitachi HDD. Nice!
I would love to get one of these for free. I would sell it and buy a car. :D
Page 1 of 2
Next