Skip to main content

Kindle Fire HDX 7" Micro USB Charging Port Replacement

What you need

  1. Kindle Fire HDX 7" Micro USB Charging Port Replacement, Speaker Bezel: step 1, image 1 of 3 Kindle Fire HDX 7" Micro USB Charging Port Replacement, Speaker Bezel: step 1, image 2 of 3 Kindle Fire HDX 7" Micro USB Charging Port Replacement, Speaker Bezel: step 1, image 3 of 3
    • Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet.

    • The adhesive is strong and may require an iOpener, or heat gun, to soften.

  2. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 2, image 1 of 1
    • Remove the speaker bezel.

  3. Kindle Fire HDX 7" Micro USB Charging Port Replacement, Rear Panel: step 3, image 1 of 1
    • Remove the six pink 3mm T3 Torx screws from the back case.

  4. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 4, image 1 of 2 Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 4, image 2 of 2
    • Wedge opening picks around the perimeter between the display and back case.

    • Work the opening picks around the perimeter until the two halves disengage from each other.

    • Don't completely separate as the display ribbon cable still connects the two.

  5. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 5, image 1 of 1
    • Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.

    • There may be a glue strip between the battery and the outside case. Gently pry the case open and use the flat end of a spudger to separate the glue strip.

  6. Kindle Fire HDX 7" Micro USB Charging Port Replacement, Micro USB Charging Port: step 7, image 1 of 1
    • Remove the four 2.3mm T5 Torx screws from the micro USB port and power button assembly.

  7. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 8, image 1 of 2 Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 8, image 2 of 2
    • Pry up the ribbon cable from the rear panel with the flat end of a spudger.

    • Remove the micro USB port and power button ribbon cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Blake Klein

Member since: 01/29/17

70,510 Reputation

50 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 9

Past 30 Days: 35

All Time: 6,458