Pro Tech Screwdriver Set

$59.95 Was $89.95
You save $30.00!

Product code: IF145-239-1

Click Image To Zoom

 
 
 
 
 

Pro Tech Screwdriver Set

$59.95 Was $89.95
You save $30.00!

Product code: IF145-239-1

Product Overview

One screwdriver set to rule them all

  • 15 fixed-bladed drivers make a wonderful addition to any workbench, eliminating lost and misidentified bits.
  • Specifically chosen by our technicians, these drivers will work great for 90% of electronics repairs.
  • High-quality SVCM (Silicon, Vanadium, Chrome, Magnesium) steel shafts with rubberized handles and spinning caps make these drivers iFixit staff favorites.
  • Bundled together in a custom-designed tool roll, this set collapses to a small 5" x 6.5" x 2" bundle.

Set Contents

Product Details

  • Driver Quantity: 15
  • Dimensions: 5" x 6.5" x 2"
  • Shaft Material: SVCM Steel
  • Handle Material: Rubber
  • Roll Material: Nylon Canvas

  $59.95

 

Condition:

New

Available: 50+

Add to Cart
 

Product Videos

 

Stories

My Problem

WiiU Controller had a massive gash in the Digitizer preventing it from working properly

My Fix

Was fairly simple after I found a properly detailed teardown video, there was a number of videos that completely skipped a few important steps of which I'll explain in a bit of detail below but besides those few issues the touchscreen functionality is practically back to what it was when I first bought the system.

My Advice

Some of the ribbon and power cables were kind of difficult to disconnect and reconnect and the first few videos I tried to follow completely skipped explaining how to disconnect the two smallest ribbon cables(the lever lifts from the opposite side of the ribbon cables insertion) and the ribbon cable near the A/B/X/Y buttons was I bit more difficult to get reinserted, I blame my larger fingers, but was somewhat remedied by removing the circuitry for those buttons which made slightly more room to work with.

My Problem

je suis professionnel de la réparation, j'ai renouvelé mon parc de tournevis pas de haut de gamme

My Fix

impecable

My Advice

avoir des numéos de suivi de livraison

My Problem

Was able to replace the battery using this tool very precise and feels like a professional product

My Fix

Repair was a success this product is good.

I know its a little too much but it does feel good to the hand and the magnetic end helps a lot when picking up the screws.

My Advice

Really great product but i hope they can reduce the price a little bit more especially during holidays they should drop the price to 35/45 would sound better

My Problem

The battery would not take any charge. I ordered a replacement battery for the laptop but I needed special screwdriver set to remove the screws from the MacBook Air bottom plate and battery module.

My Fix

The set of tools that I ordered from iFixIt made things a lot easier. What I needed was just there. The whole thing took a little less than 5 minutes.

My Advice

Aside from all the selection of tools from iFix It to get the right job done, they also have the illustrations and tear down to help you answer your questions. Just like the teardown found on the website, there's an iFixIt App as well for the iPhone.

My Problem

I have a 2011 Macbook Pro 13 that would not charge the battery. After serveral phone calls to Apple Help and a trip to "certified" Apple repair center, I was told that they had to send it out to repair ("probably" the power board). Estimate $800, No thanks. Then I found ifixit! After getting the part for $29.99 and a couple of $5 tools, i decided to give it a try. Now, you have to know that I have disassembled many machines, appliances, etc., I rarely get them back together correctly. I usaully end up replacing them.

My Fix

Following the Ifixit 40 step guide (a lot for me) I disassembled about 70% of the laptop and replaced the 13 " Magsafe Power DC - in Board. Reassembly was a bit tedious but not to difficult with the step by step photos in the Ifixit guide. Much to my (and my wife's) suprise, it fired up and started charging like new. Working great all in one hour.

My Advice

Get the right tools and instruction (Ifixit) you can do a lot more than you might think!

My Problem

The battery was completely dead after a long time of degraded performance.

My Fix

It was much easier then I had thought, after hearing too many exaggerated stories about the great difficulties with repairing MacBooks.

My Advice

Only this: Have a can of compressed air at hand and blow the dust out of the fan while you have the machine open. You wouldn't believe how much quieter it was afterwards! (Sorry, no photos.)

My Problem

Battery wasn't keeping a charge for very long so I was keeping it plugged in all the time.

My Fix

It was a piece of cake, I had read the directions a couple of times and they were so clear I didn't need to refer back to them while I was doing the job

My Advice

To keep the screws straight to put them back in the right holes (They are different lengths and sizes) I put them just outside of the laptop next to the right hole

My Problem

When Apple recalled my late 2009 iMac because of hard drive issues, I was busy / procrastinating / lazy / traveling / etc. The computer still worked, and while everything I had was backed-up and in the cloud, I couldn't upgrade to Yosemite because it recognized the serial number of a recalled HD and refused to play along. This prompted me to examine my options before paying someone to replace the HD. I came across IFIXIT online and was very impressed with the information provided, how remarkably easy it was to use the website, the prices, and the philosophy of "at least try to fix it".

My Fix

The repair was a definite success. The directions and online help were invaluable. The only technical issue I had involved the iMac HD cooling fan, which was warned about in the instructions. After installing the new drive and closing the computer back up, I had to open it again to undo the instruction for 'reversing the HD temp sensor connector'. Using some forum recommended software, I discovered that the particular new HD I installed (a Seagate 1TB SSD Hybrid) would work with the original connector in its original orientation, with no changes needed. I suspect that with manufacturing and design changing so rapidly, work-arounds in repair procedures that are needed one day are unnecessary at some point in the future. In any event, it provided another learning experience!

My Advice

Well done with your website. You have finally given me justification for refusing to recycle all those older Apple computers (I think my wife will thank you).

1) When putting everything back together I dropped the last screw into the computer innards because one of the magnets that hold the faceplate on whipped it off the screwdriver. I had to take everything apart again, but I refused to leave it loose in there. Even using needle-nose pliers to hold the screws was difficult for me because of the strength of the magnets. If there are real-world hints for solving this it would be good to know.

2) Having parts and suggested tools available and combined with the repair instructions is very much appreciated. It is truly one-stop shopping for both knowledge and function.

My Problem

The battery in my MacBook Pro was not holding a charge very long and I needed to replace the battery.

My Fix

I bought a great battery with super reviews that came with some tools but the P6 tool wasn't a P6 tool. So I came to IFIXIT to get a good tool set and after about 6 minutes had the battery all installed and the case put back together. The tools from IFIXIT worked great and felt very solid.

My Advice

I am a firm believer in the right tools make a job go smooth. Never skimp on tools. Between the tool kit and the battery, I still got the job done for less $$ than if I took the MacBook Pro to the Apple Store :)

My Problem

used to open iphone 6

My Fix

excelent made the job easy

My Advice

none