Phillips #0 Screwdriver

$0.95 Was $4.95
You save $4.00!

Product code: IF145-005

Click Image To Zoom

 
 
 
 
 
 

Phillips #0 Screwdriver

$0.95 Was $4.95
You save $4.00!

Product code: IF145-005

Product Overview

Zero to Hero

  • The #0 size of the Phillips bit is the smallest "standard" size of Phillips screwdriver (of course Phillips #00 and Phillips #000 are smaller).
  • Great for laptops, desktops, game consoles, and much more.

This size bit is also available in our popular 54 Bit Driver Kit & 26 Bit Driver Kit, carefully designed to include the most common and often hard to find driver bits used in electronics repair. This driver is also a part of our Pro Tech Screwdriver Set.

Product Details

$0.95 Economy

 
 
 

Condition:

New

Warranty:

One year warranty

Notes:

Great quality driver. Gets the job done just fine for the average Joe and semi-pros.

$5.95 iFixit

 
 

Condition:

New

Warranty:

One year warranty

Notes:

Excellent quality driver that is built to last. Rubber handle with steel shaft and swivel top. A staff favorite!

$8.95 Pro / ESD / USA

 
 

Condition:

New

Warranty:

Lifetime Manufacturer Warranty

Notes:

Top of the line professional made in USA driver with swivel top ESD safe ergonomic handle.

Lifetime Warranty.

Add to Cart
 

Stories

My Problem

Replaced built in optical drive with 250GB SSD drive. System was running really slow.

My Fix

It went well. Followed instructions and was pretty straight forward. Ran into a few hurdles....The screws can easily fall down into the case, which was very annoying. There is also a cable that has a very sensitive connector and after it had already ripped off, I read that you have to be very careful. Luckily nothing broke off. Putting it back was really tough as well.

My Advice

The only real thing that got me was the fact that no where in the instructions does it say you need to buy the adapter to fit the SSD into. Luckily I purchased one via Amazon and it arrived super fast. iFixIt also has one but it is pricy. I'm sure it's a well made one, but no one will ever see it.

There is also no info on how to ensure that TRIM is enabled. I had to go searching for a tool that did it. Cost me $10 for a simple application.

My Problem

My 13" MacBook stopped booting due to the OS not being found. I tried a friend's extra OS X-installed hard drive with no luck so I assumed that the hard drive cable was to blame.

My Fix

The iFixit repair guide was a lot better than the various YouTube videos I'd looked at. I should have paid a bit closer attention to which size screwdriver to use for which screws, as I ended up stripping one screw a little bit, but overall the process went pretty cleanly.

Unfortunately after the replacement nothing changed. I tried some RAM resets and then booted in Verbose mode only to realize the alternate hard drive had a version of OS X that wasn't supported by my hardware. Whoops. Then after reinstalling the original hard drive I realized that the hard drive was the problem all along.

My Advice

Make sure to try alternative boots and run in verbose mode before determining the cause of the problem. Assumptions can lead you down an unnecessary path. Also, if the hard drive might be the problem, listen really closely. I've heard hard drive clicking before, but I missed it this time (prior to try the repair) and would have caught it with a bit more care.

Getting the spudger and screwdrivers was worth it though, as now I can fix many other things much more easily. In fact I was able to fix my mother's old handheld CD player.

My Problem

I had 2 gigs of RAM and needed more speed for my 2008 Mac desktop. A friend of mine that's a whiz with Macs sent me your link. I ordered 2 2GB RAM chips, printed out your directions for installation and it was a snap.

My Fix

It went without a hitch. It was extremely easy. Thank you!!!!!! Now my computer is fast. It feels like I just purchased a brad new Mac.

My Advice

Go for it.

My Problem

Install the battery

My Fix

Good,but the fraim got scratch

My Advice

Get a repairmen to do it

My Problem

I decided to fix it because it was much more cheaper than buying a new chromebook.

My Fix

It went well but i had a little problem connecting the screen to the laptop. I eventually figured it out.

My Advice

If you have a cracked screen get on ifixit and get some idea on how to fix it yourself instead paying a lot more buying a new laptop.

My Problem

My Ipad Retina had a battery that would last only 2 hours. I was not sure if this was standard so I did nothing for the warranty period. On about the 14th month I tried to get it repaired under warranty, only to be told it was going to cost me $370. That's a smidgen under new price. So I decided to try and replace the battery myself.

My Fix

Not good I smashed the screen. I did get the battery installed OK. I'm in the process of ordering a new screen

My Advice

Take your time on the screen. No matter what be patient. Use the guitar picks like the instructions say. I didn't because I didn't have any and I now have a smashed screen to show for it.

My Problem

Extrem langsames Raid 1 bei defekter Originalfestplatte.

So habe ich den Entschluss gefasst, den Server mit 2 1TB Hybridplatten von Seagate und um weitere 4 GB Ram, also von 2 x 2 auf 2 x 4, aufzurüsten.

My Fix

Zu Empfehlen sind hierzu die iFixit-Anleitungen zum Austausch der Festplatte, des Lüfters und der Speichersteine. Da der Miniserver kein DVD-Laufwerk hat, aber 2 Festplatten, schaut man nach Abheben der Verkleidung direkt auf die erste Festplatte. Benutzt wurden zur Reparatur 2 Thin Putty Knifes, ein Phillips #0 Schraubenzieher und ein wertvoller Spudger, mit dem sich vorsichtig Isolierbänder, Leitungsbänder und Festplattenwärmefühler lösen ließen. Der Festplattenwärmefühler der oberen Festplatte klebt an der Platte und behält auch später noch seine Klebefunktion, wenn man ihn vorsichtig mit dem Spudger abhebelt. Der Fühler der unteren Platte ist Teil des Festplattensteckboards, welches ebenfalls vorsichtig entfernt werden muss. Zum Lösen der Verschraubung der unteren Festplatte muss auch der Lüfter entfernt werden, um alle Festplattenschrauben zu erreichen. Bei allen Manipulationen bitte darauf achten, dass die Antennenkabel, vor allem beim Zusammenbau, nirgendwo gequetscht werden.

Bis auf den erfolgreichen Einbau der beiden 4GB Speicherelemente, hat alles sehr gut funktioniert. Jedoch weigert sich mein Miniserver zu booten, sobald beide 4GB Speichersteine eingebaut sind. Dieses Problem wird zur Zeit noch diskutiert. Bisher sieht es wohl so aus, dass auch die iFixit-Speicherelemente im konkreten Fall nicht kompatibel sind. Ein erneuter Versuch mit immer wieder empfohlenen RAMs von Crucial wird folgen. Ein in diesem Zusammenhang empfohlenes EFI-Update auf die Version 1.2 geht ins Leere, da die letzte EFI-Version des besagten Servers bereits höherwertiger als 1.2 ist und damit grundsätzlich wohl bereits 8 GB RAM ermöglicht.

Wir werden sehen!

Auf jeden Fall hat es mir Spaß gemacht, das Gerät mal komplett zu zerlegen. Außerdem konnte es so auch einmal mittels eines weichen Pinsels von allem Staub befreit werden. Die neuen Festplatten von WD haben eine Betriebstemperatur von 37 bis 46 °C, je nach Auslastung und arbeiten natürlich erheblich schneller. Die alten, m.E. minderwertigen, Originalplatten von Hitachi backten regelmäßig um die 60 °C, was wohl auch zum Abrauchen geführt haben dürfte.

Bei allen Manipulationen sind dünne Gummihandschuhe, wie sie in der Medizin üblich sind, sehr hilfreich, um elektrostatische Entladungen zu vermeiden, wodurch die Elektronikelemente Schaden nehmen können.

My Advice

Nur Mut!

Nicht gleich alles zur teueren Reparatur geben oder gar wegwerfen!

My Problem

I have a MacBook Core 2 duo A1181 black case MacBook. After checking online, I found iFixit, described the problem and determined it was likely the inverter cable or the display data cable.

My Fix

Many thanks to Matt Barnes of tech support who helped me pinpoint the problem - the inverter cable. Ordered that plus a spudger & a Phillips #0 screwdriver. With a tech minded friend, we fixed it in about 2+ hours. Your repair guides and photos were a huge help and without them the repair would have been really difficult.

My Advice

Take your time! Read the directions! Know what part goes back where. This is particularly true with fasteners. (they run away, you know!) In my case, there were many of them and some really small and easy to lose.

My Problem

I have a MacBook Core 2 duo A1181 black case MacBook. After checking online, I found iFixit, described the problem and determined it was likely the inverter cable or the display data cable.

My Fix

Many thanks to Matt Barnes of tech support who helped me pinpoint the problem - the inverter cable. Ordered that plus a spudger & a Phillips #0 screwdriver. With a tech minded friend, we fixed it in about 2+ hours. Your repair guides and photos were a huge help and without them the repair would have been really difficult.

My Advice

Take your time! Read the directions! Know what part goes back where. This is particularly true with fasteners. (they run away, you know!) In my case, there were many of them and some really small and easy to lose.

My Problem

My MacBook Pro battery had a Service Battery error and I needed to replace the battery... or else I would have been stuck using my laptop with the MagSafe power cord while having the risk of everything shutting down if the cord were to be pulled.

My Fix

It took me about 15 minutes or so. The instructions were super easy to follow, both visually and textually. I couldn't complain.

My Advice

If you don't have the tools available, definitely purchase the appropriate tools as suggested with the battery.