Click Image To Zoom
California Prop 65
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Learn more >
This is the set that spawned the repair revolution. We have honed its contents to be both your everyday driver set and your go-to resource for all the security bits needed to open consumer electronics.
Each bit resides in a removable soft plastic block with five friends. The driver body is machined from a single piece of aluminum, with a ball bearing mounted swivel top. The flexible shaft is great for stereo work or other large electronics where all the screws aren’t on the surface. The drive adapter lets you use these specialty bits with any standard ¼” driver handle or most power tools.
When it comes to precision bit sets, there is no better kit. If you want something that looks as elegant as it performs, look no further than the wooden case for the 54 Bit Driver Kit. This case is emblazoned with the Fixers Fist, reminding all the world that we have the right to open our electronics. We believe that repair is noble, and so should you.
Bits Included: ¶
- Pentalobe sizes 2, 5, 6 (iPhone, MacBook Air, MacBook Pro)
- Flathead sizes 1, 1.5, 2, 2.5, 3, 3.5, 4 mm
- Phillips sizes #000, #00, #0, #1, #2
- JIS sizes 000, 00, 0, 1
- Torx sizes T3, T4, T5, T6
- Torx Security TR7, TR8, TR9, TR10, TR15, TR20 (compatible with non-security)
- Hex sizes 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 mm
- Square sizes #0, #1, #2
- Triangle size 3 mm
- Tri-wing sizes #0, #1
- Nut Driver sizes 2.5, 3, 3.5, 4, 5 mm
July 23, 2015
My iMac was overheating and making loud fan noises. After streaming 30 minutes of a movie, I had to turn it off and let it rest to cool down. I decided to search, finding out the computer has 3 fans that gets dirty with time.
It was my first time opening a computer. The fix was smooth and easy. After cleaning every single part, I put everything back together and the problem was solved. No more overheating, no more loud fan noises and the most important of all was that, I did it myself.
What helped me to do the job was the iFixit kit. Very important, try to draw a picture of the area that you are working on with each screw hole, placing each screw on the picture that you draw with transparent tape. Remember to connect all the wires and put all screws in the same order of your sketch.
July 22, 2015
Because the screen was completely shattered
It went flawless :)!!!
Just be careful with the home button cable when taking the adhesive off
July 12, 2015
Loose Screen Hinge
Not enough memory
Optical Drive Limited
Battery Life Nonexistent
Slow Hard Drive
CPU Temps were high
Tightened Screen Hinge
Added 16gb Ram
Replaced Optical Drive with a Blu Ray Burner (UJ 267)
Added 256gb Samsung 850 EVO SSD
Replaced TIM on CPU Heatsink with Gelid GC Extreme
It went really well! The ifixit guides made things a lot easier and it made the entire process a breeze. It took about a good 6 hours to do everything mentioned, but it was totally worth it.
Go slow and take time to be organized. I'm ruined hardware in the past because I was rushing or was forcing something to fit. Just go slow with whatever repair you are doing and visualize each step before you go ahead and do it.
July 9, 2015
Old battery wouldn't hold a charge.
The adhesive strip that holds the battery did come off as easily as expected.
I recommend heating the back of the case to soften/loosen the adhesive no matter what. If you are cheap like me simply fill a small sock with a handful of rice and microwave it for 1 minute and then place the warm sock on the back of the iPhone case before you attempt to remove the adhesive strips.
July 3, 2015
We were sold the wrong Macbook power adapter, and for a year and a half it's been plugged in.
The problems started with a faulty trackpad and ended with being unable to charge the device.
When the track pad popped up out of it's space, I knew I was dealing with a swelling battery.
Easy as pie! The 54-bit driver kit is a very solid set with great build quality. Being Canadian shipping cost me almost as much as the kit but I know it will last me a long time
Check the maximum amperage for your device :)
June 24, 2015
Front glass was shattered after a drop. Touch still worked but was annoying.
Followed the guide and repair was easy. Some screws inside were missing from a bad repair job before so it took a little longer than expected but everything went smoothly.
Be sure to watch out for the digitizer cable getting folded up behind the screen and the lower antenna cable getting jammed behind the logicboard.
June 3, 2015
The whole digitalizer was shattered
It took me like an hour because I didn't need to use the I opener due the fact it was so badly cracked.
Take your time and don't scratch the lcd
May 18, 2015
No problem with the right tool; ... repaired loose screw on my eye glass hinge. --- Just the most magnificent micro bits tool 'chest', as it might well be called in the beautiful box. ---
I was teaching a 14 year old piano student of mine and one of the lenses fell out of my glasses. I asked him if he had a set of jeweler's screwdrivers (that's what we used to call them) Kerry had not heard them referred to that way, but being a "young" techy adolescent, after my decsciption of what I was looking for, he pulled out his tool kit for his computer and other devises, which was his IFixit 54 Bit Driver it, and after asking him where he got it, I went to the IFixit WebSite and ordered it. It arrived in 3 days by Priority mail (a record, for anything I've ever ordered by mail)
In addition to the huge supply of 'micro' took bits and accompanying accessaries, the magnetic box lid closer plugs in ingenious.
May 18, 2015
my phone is quickly unload....
easy with your guide!!!
20 min and I have a new phone !!! Well done !!
Read the guide and do the same process...easy , quick and let's go for have a new smart phone !!!
Thanks a lot to bypass Apple strategies ifixit !!!
Fix myself and save money $$$
May 13, 2015
the sound on my beloved 2011 macbook air stopped working (my fault, i think it happened when i kept hotplugging in my hdmi cable). It was very frustrating to gave no sound coming out of the mac. I could have taken it to the apple store, but decided to have a go repairing it myself! It might be cheaper plys i would learn some new skills and it would be more fun! I took a chance on it and bought the necessary tools from ifixit!
it went spectacularly well! The toolkit from ifixit was so great and just perfect for the job! The online guide was clear and concise and easy to follow. It didnt take long at all. Plus it was so much fun opening up my mac and seeing what was inside! Thank you ifixit!
all i can say is i am glad i decided to try repairing my mac myself. I feel so much better having repaired it myself and had a good time doing it!