Skip to main content
Help
Editing Step 5 —

Step Type:

Drag to rearrange

Finally, cables that are not soldered to the board! (Take note, Studio II.) The RCA cable is easily removed.

The motherboard easily lifts out, as there are no additional screws or clips holding it in place. The only thing securing it down were the angled screws we removed from the outer case.

The motherboard measures 9.75" x 5.25" and the lower case measures 13.75" x 9.75".

The case of the 2600 is 2.6 times larger than the motherboard!

Your contributions are licensed under the open source Creative Commons license.