Editing Step 14 — Add a title

Step Type:

Drag to rearrange

Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying.

The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.

The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.

The touchscreen ribbon cable houses:

Pixcir's controversial Tango S32 Touchscreen controller

Atmel's ATmega168P 8-bit AVR microcontroller

Your contributions are licensed under the open source Creative Commons license.